Epoxy Flooring in Mission, KS

Epoxy flooring in Mission usually means a compact job. The city covers about 2.68 square miles in northeast Johnson County, and Wikipedia describes its lots as holding small houses of varied designs on large lots. That mix shows up on the floors we see here: a one-car attached garage, a detached garage at the back of a deep lot, a basement laundry corner, or a shared garage under an apartment building. Each one is a slab that takes a beating from tires, boots and Kansas winters.

Renters and owners both have floors to protect

Mission has more renters than most of its neighbors. Census QuickFacts puts the owner-occupied rate at 44.9% for 2020 to 2024, with about 1.84 people per household. That tells us a lot of Mission concrete belongs to a landlord or a homeowners association while someone else parks on it. For property owners, a coated floor makes tenant turnover simpler. Oil drips and salt rings wipe off a topcoat. On bare concrete they soak in and stay for the next tenant to see.

For owner-occupants, the goal is often different. A small garage gets used as a workshop, a gym or a storage room as much as a parking spot. A light flake floor brightens a narrow space and hides the dust that collects along the walls.

What we suggest for Mission floors

• Garage Floor Epoxy for one- and two-car garages where you want a sealed, cleanable slab at a sensible cost
• Flake Epoxy Floors where a garage doubles as a hobby room and you want texture underfoot
• Polyaspartic Floor Coating when a rental unit or a shared garage can only be out of service for a short window
• Concrete Crack & Floor Repair for older slabs with settled sections, chipped edges or old paint
• Commercial & Warehouse Floor Epoxy for back rooms, stockrooms and studio spaces in Mission's commercial buildings

Older slabs need honest prep

Mission was incorporated in 1951, and plenty of its garage floors have seen decades of use since. Old slabs tend to carry the same problems: hairline cracks, low spots where water sits, flaking at the garage door, and a layer of paint or sealer someone rolled on years ago. A coating will not stick to any of that for long. We grind the full surface, fill cracks and pits, and only then lay down the base coat. If a section has heaved or is breaking up, we tell you that before we quote, because no topcoat fixes a failing slab.

Multi-unit and HOA jobs

When a garage is shared, scheduling matters as much as the coating. We can split a larger garage into sections so residents still have somewhere to park, and we can use faster-curing products where downtime is the main concern. We put the scope, the sections and the timeline in writing so a property manager can share it with residents ahead of time.

Pricing a Mission floor

A small garage does not always mean a small price per square foot. Setup, grinding equipment and material minimums cost about the same whether the slab is 250 or 500 square feet. What moves the number most is condition: how much paint comes off, how many cracks need filling and whether a low spot needs leveling. We measure, look at the slab and write all of that into one price. If you own several units in the same building, coating them in one visit usually lowers the cost for each.

Get a Free Estimate